KARL STORZ [Neurosurgery Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== KARL STORZ ======

see [[Storz]]

KARL STORZ offers an extensive range of [[instrument]]s for intracranial [[procedures]], for creating access, and for [[skull base surgery]] that is supplemented by a special pediatric product range. 

The portfolio is completed by a high speed motor system with a large variety of [[drill]], [[craniotome]], and perforator handpieces.


HX Camera Heads

IMAGE 1 SPIES

IMAGE1 SPIES™ 3D

[[ENDOCAMELEON]]® NEURO 

[[LOTTA]]® System
Two ventriculoscopes – diameter 3.6 mm and 6.1 mm – for the entire range of endoscopic intracranial procedures
    
6° angle of view for visual control of instruments after exiting the working channel
    
Specially developed instrument sets for LOTTA® and Little LOTTA®

[[ShuntScope]].

UNIDRIVE® S III NEURO
----
Mr. Karl-Christian Storz is a Founder of KARL STORZ GmbH & Co. KG. Mr. Storz began producing instruments for ENT specialists in 1945. Mr. Storz's intention was to develop instruments which would enable the practitioner to look inside the human body. He set out to introduce very bright, but cold light into the body cavities through the instrument, thus providing excellent visibility while at the same time allowing objective documentation by means of image transmission. ...