Show pageBacklinksCite current pageExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. In fluid dynamics, the fluid [[flow]] is often decomposed into a mean flow – and deviations from the mean. The averaging can be done either in space or in time, or by ensemble averaging. ===== Example ===== Calculation of the mean flow may often be as simple as the mathematical mean: simply add up the given flow rates and then divide the final figure by the number of initial readings. For example, given two discharges (Q) of 3 m³/s and 5 m³/s, we can use these flow rates Q to calculate the mean flow rate Qmean. Which in this case is Qmean = 4 m³/s. mean_flow.txt Last modified: 2024/06/07 02:59by 127.0.0.1